Is your Lana Vape flashing red or suddenly stopped hitting? Don't throw it away just yet! As the leading Vape Shop in Singapore, we’ve helped thousands of users fix their Lana devices. In this guide, we’ll show you exactly how to troubleshoot your Lana 2 or Lana Infinity in seconds.
1. Clean the Contact Points (The #1 Culprit)
The most common reason for a Lana pod not working is leaked juice blocking the connection.
-
The Fix: Take a cotton swab (Q-tip), dip it in a bit of rubbing alcohol, and gently clean the gold pins inside the device and the bottom of the pod. Dry it completely and try again.
2. Check the Battery Levels
If your Lana is flashing red 10 times, it’s usually a low battery warning.
-
The Fix: Use a Type-C cable to charge it for at least 30 minutes. Pro Tip: Avoid using high-wattage fast chargers (like MacBook chargers) as they can damage the small battery.
3. Airflow Blockage
Sometimes, the tiny air intake holes on the side of your Lana device get blocked by dust or pocket lint.
-
The Fix: Blow sharply into the USB charging port or the side holes to clear any debris.
4. Pod "Dead on Arrival" (DOA)
If you just opened a new pack of Lana pods and it won't hit, the internal coil might be dry or disconnected.
-
The Fix: Try a different pod from the same pack. If the new one works, the previous one was likely a factory defect.
5. Where to Buy Original Lana Vape in Singapore?
To avoid device failures, always ensure you are using authentic Lana products. Fake pods often leak and damage your device's internal circuitry.
At Vape SG SG, we guarantee 100% original Lana pods and devices with same-day delivery in Singapore.
0 comments